To submit information for posting on this calendar, use our Event Submission Form.

Loading Events

← Back to Events

Monteith Research Center (Room 324), NC State University

+ Google Map
2410 Campus Shore Drive
Raleigh, NC United States

October 2015

In Situ Characterization Workshop

October 28, 2015 @ 8:30 am - 12:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
Free

Research Triangle Nantotechnology Network (RTNN) and AIF will host an In Situ materials characterization workshop on October 28, 2015 from 8:30 am to 11:30 am at Centennial Campus, Monteith Research Center, 2410 Campus Shore Drive, Room 246. Agenda 8:30 am – Welcome to AIF and Research Triangle Nanotechnology Network Dr. Elizabeth Dickey, Center for Dielectrics & Piezoelectrics Director 8:45 am – In-situ TEM, Beth Dicky, North Carolina State University 9:15 am – In-situ X-ray Diffraction for Materials Development and Innovation Chris Fancher,…

Find out more »

December 2015

Rietveld Workshop

December 14, 2015 @ 9:00 am - 12:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
Free

The primary goal of this workshop is to teach participants the Rietveld refinement method for evaluating crystal structures from 1D diffraction data. This workshop will consist of a lecture describing the Rietveld refinement process and a hands-on exercise. Requirements: Download GSAS-II, you will need to download Python. If you are interested in the workshop, please contact Jacob Jones at jacobjones@ncsu.edu for further information.

Find out more »

January 2016

SEM Short Course

January 8, 2016 @ 8:00 am - 5:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

This hands-on short course on Scanning Electron Microscopy (SEM) is offered on a routine basis.  In addition to two lectures on SEM theory, each student will get hands-on time (90 minute or more per student) running the AIF variable pressure SEM (VPSEM).  The goal of the course is to provide students a basic understanding of both theory and practice such that they can operate any SEM with minimal training.  By the end of the day, the students should be able…

Find out more »

Keyence Digital Microscope Demonstration

January 28, 2016 @ 10:30 am - 11:30 am
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
Free

A representative from Keyence will demonstrate their VHX 5000 Digital Microscope System.  Bring samples and a thumb drive, if you want to collect data with the help of the Keyence representative. Contact Roberto Garcia at rgarcia@ncsu.edu for more information.  

Find out more »

February 2016

FIB Short Course

February 5, 2016 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

This FIB short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To insure each student receives a maximum of time on the FIB, the course will be limited to 6 participants. For more details and to register, please…

Find out more »

March 2016

XRD Short Course

March 4, 2016 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

This introductory course will cover basic principles of X-ray diffraction (XRD), operation of diffractometers in Bragg-Brentano geometry (that typically used for powders), and basic phase identification. It is meant for first-time XRD users and/or those interested in learning phase identification and pattern matching in HighScore software. The course will include 1 hour theory component (taught by Assoc. Prof. Jacob Jones), 1 hour of phase identification training in the AIF Data Analysis center, and 1-3 hours of a practical component in…

Find out more »

April 2016

XPS and ToF-SIMS Short Course

April 8, 2016 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

This introductory short course will cover basic principles of surface analysis and the two commonly used techniques X-ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) including theory and applications. It is meant for those who are interested in surface analysis of both soft and hard materials. The course will include 1 hour theory component of XPS and ToF-SIMS each in the morning and in the afternoon, respectively and 1.5 – 2 hour demonstration and hand-on of each instrument right…

Find out more »

August 2016

X-ray Diffraction (XRD) Short Course

August 26, 2016 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State’s Analytical Instrumentation Facility (AIF) is giving a hands-on short course on X-ray Diffraction (XRD). This introductory course will cover basic principles of X-ray diffraction, operation of diffractometers in Bragg-Brentano geometry (that typically used for powders), and basic phase identification. It is meant for first-time XRD users and/or those interested in learning phase identification and pattern matching in HighScore software. The course will include a 1-hour theory component (taught by Prof. Jacob Jones), 1-hour of phase identification training in…

Find out more »

September 2016

Nanoindentation Short Course

September 9, 2016 @ 9:00 am - 12:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

This introductory short course will cover the basic principles and operation of nanomechanical testing through quasistatic nanoindentation.   The lecture component will introduce the concepts of deformation using nanoindentation, Oliver-Pharr contact mechanics analysis to determine mechanical properties, system capabilities, and sample preparation.  An interactive demonstration will introduce attendees to operation and parameter optimization for soft and hard materials on the Hysitron nanoindentation system at AIF.  Users are welcome to bring their own samples (prior sample preparation necessary). Contact Phillip Strader at phillip_strader@ncsu.edu for…

Find out more »

Focused Ion Beam (FIB) Short Course

September 16, 2016 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

The Focused Ion Beam (FIB) short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the FIB, the course will be limited to 6 participants. For more details and…

Find out more »

XPS and ToF-SIMS Short Course

September 30, 2016 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State's Analytical Instrumentation Facility (AIF) is giving a hands-on short course on X-ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS). This introductory course will cover basic principles of surface analysis and the two commonly used techniques XPS and ToF-SIMS including theory and applications. It is meant for those who are interested in surface analysis of both soft and hard materials. The course will include 1 hour theory component of XPS and ToF-SIMS each in the morning…

Find out more »

January 2017

Focused Ion Beam (FIB) Short Course

January 20, 2017 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

The Focused Ion Beam (FIB) short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the FIB, the course will be limited to 6 participants. For more details and…

Find out more »

Electron Backscatter Diffraction (EBSD) Workshop

January 27, 2017 @ 9:00 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

This Workshop will be mainly centered around specimen detector geometry and how the software gathers and interprets the data. This will be pertinent to EBSD and Transmission Kikuchi Diffraction (TKD) data collection. The workshop will be set up as a lecture followed by hands on data processing using Aztec with data that has been previously acquired. All current users of the EBSD system and those interested in learning more should attend. Please be prepared to ask questions and discuss any…

Find out more »

February 2017

X-ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) Short Course

February 17, 2017 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State’s Analytical Instrumentation Facility (AIF) is giving a hands-on short course on X-ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS). This introductory course will cover basic principles of surface analysis and the two commonly used techniques XPS and ToF-SIMS including theory and applications. It is meant for those who are interested in surface analysis of both soft and hard materials. The course will include 1 hour theory component of XPS and ToF-SIMS each in the morning…

Find out more »

March 2017

Focused Ion Beam Short Course

March 10, 2017 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State's Analytical Instrumentation Facility will offer another Focused Ion Beam (FIB) short course on March 10th. The short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the…

Find out more »

April 2017

Focused Ion Beam Short Course

April 28, 2017 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State's Analytical Instrumentation Facility will offer another Focused Ion Beam (FIB) short course on April 28th. The short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the…

Find out more »

May 2017

Focused Ion Beam Short Course

May 19, 2017 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State's Analytical Instrumentation Facility will offer another Focused Ion Beam (FIB) short course on April 28th. The short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the…

Find out more »

September 2017

X-ray Diffraction Short Course

September 15, 2017 @ 8:30 am - 5:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State’s Analytical Instrumentation Facility (AIF) is giving a hands-on short course on X-ray Diffraction (XRD). This introductory course will cover basic principles of X-ray diffraction, operation of diffractometers in Bragg-Brentano geometry (that typically used for powders), and basic phase identification. It is meant for first-time XRD users and/or those interested in learning phase identification and pattern matching in HighScore software. The course will include a 1-hour theory component, 1-hour of phase identification training in the AIF Data Analysis center,…

Find out more »

Focused Ion Beam Short Course

September 29, 2017 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State's Analytical Instrumentation Facility will offer another Focused Ion Beam (FIB) short course on September 29th. The short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the…

Find out more »

April 2018

Confocal Raman Spectroscopy Short Course

April 13, 2018 @ 9:00 am - 1:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

This short course includes lectures covering an introduction to Raman spectrometry and Confocal Raman spectroscopy techniques, an overview of the principles and operation of the Raman, as well as applications such as Raman on liquid and solids. Also, there will be hands-on demos of these applications on the Horiba Xplora Confocal Raman. To ensure each student receives a maximum of time on the Raman, the course will be limited to 4 participants. For more details and to register, please contact…

Find out more »

Focused Ion Beam Short Course

April 27, 2018 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State's Analytical Instrumentation Facility will offer another Focused Ion Beam (FIB) short course on April 27th. The short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the…

Find out more »

May 2018

Focused Ion Beam Short Course

May 25, 2018 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

This short course includes lectures covering an introduction to the focused ion beam (FIB) technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the FIB, the course will be limited to 4 participants. For more details and to…

Find out more »

June 2018

XPS and ToF-SIMS Short Course

June 8, 2018 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State’s Analytical Instrumentation Facility (AIF) is giving a hands-on short course on X-ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS). This introductory course will cover basic principles of surface analysis and the two commonly used techniques XPS and ToF-SIMS including theory and applications. It is meant for those who are interested in surface analysis of both soft and hard materials. The course will include 1 hour theory component of XPS and ToF-SIMS each in the morning…

Find out more »

Focused Ion Beam Short Course

June 22, 2018 @ 8:30 am - 5:30 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State's Analytical Instrumentation Facility will offer another Focused Ion Beam (FIB) short course on June 22nd. The short course includes lectures covering an introduction to the FIB technique, an overview of the principles and operation of the FIB as well as applications such as FIB prepared SEM and TEM cross section. Also, there will be hands on demos of these applications on the AIF Quanta Dual Beam FIB-SEM. To ensure each student receives a maximum of time on the…

Find out more »

X-ray Diffraction Short Course

June 29, 2018 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State’s Analytical Instrumentation Facility (AIF) is giving a hands-on short course on X-ray Diffraction (XRD). This introductory course will cover basic principles of X-ray diffraction, operation of diffractometers in Bragg-Brentano geometry (that typically used for powders), and basic phase identification. It is meant for first-time XRD users and/or those interested in learning phase identification and pattern matching in HighScore software. The course will include a 1-hour theory component, 1-hour of phase identification training in the AIF Data Analysis center,…

Find out more »

September 2018

X-ray Diffraction Short Course

September 7, 2018 @ 8:30 am - 4:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

NC State’s Analytical Instrumentation Facility (AIF) is giving a hands-on short course on X-ray Diffraction (XRD). This introductory course will cover basic principles of X-ray diffraction, operation of diffractometers in Bragg-Brentano geometry (that typically used for powders), and basic phase identification. It is meant for first-time XRD users and/or those interested in learning phase identification and pattern matching in HighScore software. The course will include a 1-hour theory component, 1-hour of phase identification training in the AIF Data Analysis center,…

Find out more »

Scanning Electron Microscopy Short Course

September 21, 2018 @ 8:00 am - 5:00 pm
Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

January 2019

X-ray Diffraction (XRD) Short Course

January 25, 2019 @ 9:00 am - 4:00 pm
|Recurring Event (See all)

One event on March 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

This introductory XRD short course will cover basic principles of X-ray diffraction, operation of diffractometers in Bragg-Brentano geometry (typically used for powders), and basic phase identification. It is meant for first-time XRD users and/or those interested in learning phase identification and pattern matching in HighScore software. The course will include 1 hour theory component, 1 hour of phase identification training in the AIF Data Analysis center, and 1-3 hours of a practical component in the XRD lab (as needed). After completion of…

Find out more »

February 2019

Scanning Electron Microscopy Short Course

February 8, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

March 2019

Scanning Electron Microscopy Short Course

March 1, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

X-ray Diffraction (XRD) Short Course

March 15, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map
$50 – $350

This introductory XRD short course will cover basic principles of X-ray diffraction, operation of diffractometers in Bragg-Brentano geometry (typically used for powders), and basic phase identification. It is meant for first-time XRD users and/or those interested in learning phase identification and pattern matching in HighScore software. The course will include 1 hour theory component, 1 hour of phase identification training in the AIF Data Analysis center, and 1-3 hours of a practical component in the XRD lab (as needed). After completion of…

Find out more »

April 2019

Scanning Electron Microscopy Short Course

April 5, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

May 2019

Scanning Electron Microscopy Short Course

May 10, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

June 2019

Scanning Electron Microscopy Short Course

June 7, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

August 2019

Scanning Electron Microscopy Short Course

August 2, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

September 2019

Scanning Electron Microscopy Short Course

September 13, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »

November 2019

Scanning Electron Microscopy Short Course

November 15, 2019 @ 9:00 am - 5:00 pm
|Recurring Event (See all)

One event on March 1, 2019 at 9:00 am

One event on April 5, 2019 at 9:00 am

One event on May 10, 2019 at 9:00 am

One event on June 7, 2019 at 9:00 am

One event on August 2, 2019 at 9:00 am

One event on September 13, 2019 at 9:00 am

One event on November 15, 2019 at 9:00 am

Monteith Research Center (Room 324), NC State University, 2410 Campus Shore Drive
Raleigh, NC United States
+ Google Map

The goal for the day is to learn the basics of scanning electron microscopy (SEM) theory and SEM operation so that you can apply that knowledge to analyzing your own samples and/or understanding what SEM data means. Please note that a short course is designed to teach you how the technique works, the data that can be derived thereof, and what the generated data means. Training is designed to teach you the operational specifics of a particular instrument. Assuming that…

Find out more »
+ Export Events